Imágenes del producto3 Fotos

Light acacia garden high table 180x100cm – Baracoa

885,00 589,00

  • FSC-certified light acacia structure
  • High robustness and firmness
  • Measurements: 180x100x93cm

Buy now and recieve it between 10/07 and 17/07

We help you to create your outdoor oasis: CONTACT US

Availability: In Stock

SKU: KMJBRCMA Categories: , Tags: ,

Garden table from the Baracoa collection made of acacia wood in a light colour that is very resistant to adverse environmental conditions. The table stands out for its robustness and firmness. The wood used in this table is FSC certified, which guarantees the sustainability of the forests and the environment. Measurement; 180x100x93cm
Can be combined with the other pieces of the Baracoa family

Additional information

Heigth

Length

Width

Material

Shape

Collection

Product space

Height: 93cm
Width: 180cm
Length: 100cm
Recommendations for unpacking: Do not use sharp utensils when unpacking the furniture as this may cause damage.
Mounting required (yes/no): Yes
Difficulty of assembly: Low
Assembly time: 20 minutes
Recommended persons for assembly: 2
Mounting suggestions: Prepare a clean and dry mounting area, check that none of the parts indicated in the manual are missing. We recommend wearing gloves suitable for assembly. Use only the supplied parts and hardware.

General recommendations:
• Breakdowns or damage caused by:
• Accidental causes such as falls, blows, spillage of liquids, introduction of foreign bodies, as well as any other force majeure.
• Negligent, improper, or non-domestic use.
• Accelerated damage, corrosion and/or oxidation due to adverse environmental conditions
• Stains and discolorations due to non-respect of our cleaning instructions
• Damage occurred during assembly and handling without having followed the indicated assembly instructions.
Instructions for use and maintenance:
• Clean with the help of a cloth gently or use a neutral liquid soap, rinsing with plenty of water.
• Remove dust regularly with the help of a soft cloth and clear water.
• Do not use detergents or abrasive products for cleaning.
– Linseed oil treatment: Before applying a layer of linseed oil on the product in its natural state, it is advisable to leave it outside for 2 or 3 weeks, so that it takes on a homogeneous appearance and aerate it. Clean with clean water using a brush and allow to dry. Once it is well dry, it should be sanded with a sheet of sandpaper between 120 and 150 grams, carefully and loosely, following, as far as possible, the direction of the veins; this operation should never be carried out in the early hours of the day.
To maintain the color, it is advisable to repeat the process once or twice a year.
If the linseed oil has already been applied to the furniture, it is advisable to sand it every three years so that the successive coats of oil do not prevent the wood from transpiring.
Years warranty: 3 years
Manufactured according to Standard: 581-1,581-2,581-3
FSC certification (yes/no): Yes