The set of high table and Riviera stools is made of light-colored acacia wood certified by the FSC organization. Wood comes from sustainable foreststhus ensuring the responsible management of the planet’s forest resources from an environmental, social and economic point of view.
This set is composed of a high table of 159x90x95 cm and 4 stools made of an acacia wood structure, braided polyester rope imitating linen and with beige removable cushions .
You can combine the set with other products in the Riviera range and protect it with a cover from our range of garden furniture garden furniture when it is not in use.
See other
sets of garden table and chairs
.
Height: Chair 97 cm/ Table 95 cm
Width: Chair 58 cm / Table 90 cm
Length: Chair 68 / Table 159 cm
Recommendations for unpacking: Do not use sharp utensils when unpacking the furniture as it could cause damage
Requires mounting (yes/no): Yes
Difficulty of assembly: Casualty
Assembly time: 60 minutes
Recommended people for assembly: 2
Assembly suggestions: Prepare a clean and dry mounting area, check that none of the parts indicated in the manual are missing. We recommend wearing gloves suitable for assembly. Use only the supplied parts and hardware.
General recommendations:
• Breakdowns or damage caused by:
• Accidental causes such as falls, blows, spillage of liquids, introduction of foreign bodies, as well as any other force majeure.
• Negligent, improper, or non-domestic use.
• Accelerated damage, corrosion and/or oxidation due to adverse environmental conditions
• Stains and discolorations due to non-respect of our cleaning instructions
• Damage occurred during assembly and handling without having followed the indicated assembly instructions.
Instructions for use and maintenance:
• Clean with the help of a cloth gently or use a neutral liquid soap, rinsing with plenty of water.
• Remove dust regularly with the help of a soft cloth and clear water.
• Product color may vary depending on lighting and environmental conditions. Variation of veins and/or tonality.
• Do not use detergents or abrasive products for cleaning.
– Linseed oil treatment: Before applying a layer of linseed oil on the product in its natural state, it is advisable to leave it outside for 2 or 3 weeks, so that it takes on a homogeneous appearance and aerate it. Clean with clean water using a brush and allow to dry. Once it is well dry, it should be sanded with a sheet of sandpaper between 120 and 150 grams, carefully and loosely, following, as far as possible, the direction of the veins; this operation should never be carried out in the early hours of the day.
To maintain the color, it is advisable to repeat the process once or twice a year.
If the linseed oil has already been applied to the furniture, it is advisable to sand it every three years so that the successive coats of oil do not prevent the wood from transpiring.
Years warranty: 3 years
Manufactured according to Standard: 581-1,581-2,581-3
FSC certification (yes/no): Yes
16 Fotos
