Garden set table 230×100 Riviera and 8 chairs enea – Java Light

~~2.183,00€~~ 1.679,00€

Light colored acacia wood dining table
8 folding garden chairs with armrests
Chair with backrest and seat in synthetic rattan
FSC certified wood

Buy now and recieve it between 12/07 and 19/07

We help you to create your outdoor oasis: CONTACT US

Availability: In Stock

Set formed by a garden table Riviera is made of light colored acacia wood ( Height 75 x Length 230 × Depth 100 ) The wood is FSC certified thus guaranteeing the responsible management of the planet’s forest resources from an environmental, social and economic point of view, and 8 folding acacia wood chairs with armrests. The base of the seat and the backrest are made of synthetic rattan imitating a natural finish. The wood finish is in a light tone. Measures 56,5×53,5x85cm. Weight 7kg

Additional information

Material	Light wood, Rattan

Height: table 75cm / chair 85cm

Width: table 230cm / chair 56.5cm

Background: table 100cm / chair 53cm

Recommendations for unpacking: Do not use sharp utensils when unpacking the furniture as it could cause damage
Requires mounting (yes/no): Yes
Difficulty of assembly: Casualty
Assembly time: 40 minutes
Recommended people for assembly: 2
Assembly suggestions: Prepare a clean and dry mounting area, check that none of the parts indicated in the manual are missing. We recommend wearing gloves suitable for assembly. Use only the supplied parts and hardware.

General recommendations:
• Breakdowns or damage caused by:
• Accidental causes such as falls, blows, spillage of liquids, introduction of foreign bodies, as well as any other force majeure.
• Negligent, improper, or non-domestic use.
• Accelerated damage, corrosion and/or oxidation due to adverse environmental conditions
• Stains and discolorations due to non-respect of our cleaning instructions
• Damage occurred during assembly and handling without having followed the indicated assembly instructions.
Instructions for use and maintenance:
• Clean with the help of a cloth gently or use a neutral liquid soap, rinsing with plenty of water.
• Remove dust regularly with the help of a soft cloth and clear water.
• Do not use detergents or abrasive products for cleaning.
– Linseed oil treatment: Before applying a layer of linseed oil on the product in its natural state, it is advisable to leave it outside for 2 or 3 weeks, so that it takes on a homogeneous appearance and aerate it. Clean with clean water using a brush and allow to dry. Once it is well dry, it should be sanded with a sheet of sandpaper between 120 and 150 grams, carefully and loosely, following, as far as possible, the direction of the veins; this operation should never be carried out in the early hours of the day.
To maintain the color, it is advisable to repeat the process once or twice a year.
If the linseed oil has already been applied to the furniture, it is advisable to sand it every three years so that the successive coats of oil do not prevent the wood from transpiring.
Years warranty: 3 years
Manufactured according to Standard: 581-1,581-2,581-3
FSC certification (yes/no): Yes