Garden set oval table 220×115 and 8 synthetic rattan chairs – Riviera & Bologna
3.834,00€ 2.949,00€
- Oval garden table made of light acacia wood
- 8 stackable hand-braided synthetic rattan chairs with cushion
- The cushions are removable and washable
- FSC certified wood
PRE-ORDER, SHIPMENTS IN EARLY OCTOBER
We help you to create your outdoor oasis: CONTACT US
Disponible para reservas
Set consisting of an oval dining table 220x115cm of acacia wood light finish and 8 stackable outdoor dining chairs made with aluminum structure and synthetic rattan braided by hand in dark beige brown and cushions in polyester of 230g. The seat cushion is made of beige polyester and removable. The filling of the base is 22D foam and 5cm thick. Measures: 62x65x86cm. The wood finish is in a light tone. Measures 56,5×53,5x85cm. Weight 7kg. The wood is FSC certified, guaranteeing good forest, economic and social management of resources.
Additional information
Material |
---|
Mounting required (yes/no): Yes
Difficulty of assembly: Medium
Assembly time: 30 minutes
Recommended persons for assembly: 2
Mounting suggestions: Prepare a clean and dry mounting area, check that none of the parts indicated in the manual are missing. We recommend wearing gloves suitable for assembly. Use only the parts and hardware supplied.
General recommendations:
• Breakdowns or damage caused by:
• Accidental causes such as falls, blows, spillage of liquids, introduction of foreign bodies, as well as any other force majeure.
• Negligent, improper, or non-domestic use.
• Accelerated damage, corrosion and/or oxidation due to adverse environmental conditions
• Stains and discolorations due to non-respect of our cleaning instructions
• Damage occurred during assembly and handling without having followed the indicated assembly instructions.
Instructions for use and maintenance:
• Clean with the help of a cloth gently or use a neutral liquid soap, rinsing with plenty of water.
• Remove dust regularly with the help of a soft cloth and clear water.
• Do not use detergents or abrasive products for cleaning.
– Linseed oil treatment: Before applying a layer of linseed oil on the product in its natural state, it is advisable to leave it outside for 2 or 3 weeks, so that it takes on a homogeneous appearance and aerate it. Clean with clean water using a brush and allow to dry. Once it is well dry, it should be sanded with a sheet of sandpaper between 120 and 150 grams, carefully and loosely, following, as far as possible, the direction of the veins; this operation should never be carried out in the early hours of the day.
To maintain the color, it is advisable to repeat the process once or twice a year.
If the linseed oil has already been applied to the furniture, it is advisable to sand it every three years so that the successive coats of oil do not prevent the wood from transpiring.
Years warranty: 3 years
Manufactured according to Standard: 581-1,581-2,581-3
FSC certification (yes/no): Yes