Imágenes del producto4 Fotos

Pack of 2 light acacia and grey rope outdoor high chairs – Baracoa

809,00 539,00

  • FSC-certified light acacia structure
  • Grey polyester rope
  • Removable and washable cushions
  • Chair 62x61x97

SHIPMENTS IN EARLY SEPTEMBER

Buy now and recieve it between 10/12 and 17/12

We help you to create your outdoor oasis: CONTACT US

Availability: In Stock

SKU: KMJBRCT2 Categories: , Tags: , ,

Pack of 2 acacia garden chairs in light colour with FSC sustainability certificate, polyester rope in light grey and polyester cushions in grey with woven foam fabric on the seat and polyester padding on the backrest. .
The combination of the width of the chair together with the comfort of the cushions allow for long sitting. Measurements: 62x61x97.
Can be combined with the other pieces of the Baracoa family

Additional information

Heigth

Length

Width

Material

,

Color

Light gray

Seats

Characteristics

,

Collection

Product space

Height: 97cm
Width: 62cm
Length: 61cm
Recommendations for unpacking: Do not use sharp utensils when unpacking the furniture as this may cause damage.
Mounting required (yes/no): Yes
Difficulty of assembly: Low
Assembly time: 20 minutes
Recommended persons for assembly: 2
Mounting suggestions: Prepare a clean and dry mounting area, check that none of the parts indicated in the manual are missing. We recommend wearing gloves suitable for assembly. Use only the supplied parts and hardware.

General recommendations:
• Breakdowns or damage caused by:
• Accidental causes such as falls, blows, spillage of liquids, introduction of foreign bodies, as well as any other force majeure.
• Negligent, improper, or non-domestic use.
• Accelerated damage, corrosion and/or oxidation due to adverse environmental conditions
• Stains and discolorations due to non-respect of our cleaning instructions
• Damage occurred during assembly and handling without having followed the indicated assembly instructions.
Instructions for use and maintenance:
• Clean with the help of a cloth gently or use a neutral liquid soap, rinsing with plenty of water.
• Remove dust regularly with the help of a soft cloth and clear water.
• Do not use detergents or abrasive products for cleaning.
– Linseed oil treatment: Before applying a layer of linseed oil on the product in its natural state, it is advisable to leave it outside for 2 or 3 weeks, so that it takes on a homogeneous appearance and aerate it. Clean with clean water using a brush and allow to dry. Once it is well dry, it should be sanded with a sheet of sandpaper between 120 and 150 grams, carefully and loosely, following, as far as possible, the direction of the veins; this operation should never be carried out in the early hours of the day.
To maintain the color, it is advisable to repeat the process once or twice a year.
If the linseed oil has already been applied to the furniture, it is advisable to sand it every three years so that the successive coats of oil do not prevent the wood from transpiring.
Years warranty: 3 years
Manufactured according to Standard: 581-1,581-2,581-3
FSC certification (yes/no): Yes