Imágenes del producto5 Fotos

Pack of 8 wooden and rope chairs with black cushions – zanzibar

1.644,00 1.305,00

  • Pack of 8 outdoor dining chairs
  • Made with wooden structure with FSC certificate of light color acacia
  • Hand-braided polyester rope and black cushions
  • You can combine them with the other elements of the Riviera product family

Buy now and recieve it between 27/12 and 03/01

We help you to create your outdoor oasis: CONTACT US

Availability: In Stock

SKU: KMJ50483 Categories: , Tags: , ,

Pack of 8 outdoor dining chairs made with a light-coloured acacia wood frame, black hand-braided polyester rope and anthracite-coloured cushions. You can combine them with the other elements of the Zanzibar product family. Measurements: 58x66x75cm

Additional information

Heigth

Length

Width

Material

,

Color

Beige

Seats

Characteristics

Collection

Height: 75 cm
Width: 58 cm
Depth: 66 cm
Seat depth without cushion: 11cm
Seat depth with cushion: 36cm
Seat height: 51cm
Conditions for unpacking: Do not use sharp utensils when unpacking the furniture as this may cause damage to the furniture.
Mounting required (yes/no): Yes
Difficulty of assembly: Low
Assembly time: 30 minutes
Recommended persons for assembly: 2
Mounting suggestions: Prepare a clean and dry mounting area, check that none of the parts indicated in the manual are missing. We recommend wearing gloves suitable for assembly. Use only the supplied parts and hardware.

General recommendations:
• Breakdowns or damage caused by:
• Accidental causes such as falls, blows, spillage of liquids, introduction of foreign bodies, as well as any other force majeure.
• Negligent, improper, or non-domestic use.
• Accelerated damage, corrosion and/or oxidation due to adverse environmental conditions
• Stains and discolorations due to non-respect of our cleaning instructions
• Damage occurred during assembly and handling without having followed the indicated assembly instructions.
Instructions for use and maintenance:
• Clean with the help of a cloth gently or use a neutral liquid soap, rinsing with plenty of water.
• Remove dust regularly with the help of a soft cloth and clear water.
• Do not use detergents or abrasive products for cleaning.
– Linseed oil treatment: Before applying a layer of linseed oil on the product in its natural state, it is advisable to leave it outside for 2 or 3 weeks, so that it takes on a homogeneous appearance and aerate it. Clean with clean water using a brush and allow to dry. Once it is well dry, it should be sanded with a sheet of sandpaper between 120 and 150 grams, carefully and loosely, following, as far as possible, the direction of the veins; this operation should never be carried out in the early hours of the day.
To maintain the color, it is advisable to repeat the process once or twice a year.
If the linseed oil has already been applied to the furniture, it is advisable to sand it every three years so that the successive coats of oil do not prevent the wood from transpiring.
Years warranty: 3 years
Manufactured according to Standard: 581-1,581-2,581-3
FSC certification (yes/no): Yes