Pack of 2 garden armchairs in light coloured acacia wood and hand-braided polyester rope. The Riviera collection is characterized by the use of acacia wood in light color with a rustic finish for its structure. The width of the structure of the collection makes the Riviera pieces exceptionally durable. This structure is covered with a beautiful beige polyester synthetic rope that combines perfectly with the ecru removable cushions imitating the linen of the collection. The combination of all the elements makes this collection fit into a wide variety of garden and terrace styles. Armchair: 73x79x68.5cm, Footrest: 50x40x42cm
Height: Armchair 68.5 cm / Table 53 cm / Footrest 42cm
Width: Armchair 79 cm / Table 40 cm / Footrest 40cm
Length: Armchair 73 cm / Table 40 cm / Footrest 50cm
Recommendations for unpacking: Do not use sharp utensils when unpacking the furniture as this may cause damage.
Mounting required (yes/no): Yes
Difficulty of assembly: Low
Assembly time: 60 minutes
Recommended persons for assembly: 2
Mounting suggestions: Prepare a clean and dry mounting area, check that none of the parts indicated in the manual are missing. We recommend wearing gloves suitable for assembly. Use only the supplied parts and hardware.
General recommendations:
• Breakdowns or damage caused by:
• Accidental causes such as falls, blows, spillage of liquids, introduction of foreign bodies, as well as any other force majeure.
• Negligent, improper, or non-domestic use.
• Accelerated damage, corrosion and/or oxidation due to adverse environmental conditions
• Stains and discolorations due to non-respect of our cleaning instructions
• Damage occurred during assembly and handling without having followed the indicated assembly instructions.
Instructions for use and maintenance:
• Clean with the help of a cloth gently or use a neutral liquid soap, rinsing with plenty of water.
• Remove dust regularly with the help of a soft cloth and clear water.
• Do not use detergents or abrasive products for cleaning.
– Linseed oil treatment: Before applying a layer of linseed oil on the product in its natural state, it is advisable to leave it outside for 2 or 3 weeks, so that it takes on a homogeneous appearance and aerate it. Clean with clean water using a brush and allow to dry. Once it is well dry, it should be sanded with a sheet of sandpaper between 120 and 150 grams, carefully and loosely, following, as far as possible, the direction of the veins; this operation should never be carried out in the early hours of the day.
To maintain the color, it is advisable to repeat the process once or twice a year.
If the linseed oil has already been applied to the furniture, it is advisable to sand it every three years so that the successive coats of oil do not prevent the wood from transpiring.
Years warranty: 3 years
Manufactured according to Standard: 581-1,581-2,581-3
FSC certification (yes/no): Yes
5 Fotos
