Beige teak and rope armchair – Bolzano
1.000,00€ 749,00€
- Made of light-colored acacia wood with hand-braided polyester rope
- Sand-colored polyester cushions
- FSC certified wood
Buy now and recieve it between 28/11 and 05/12
We help you to create your outdoor oasis: CONTACT US
Availability: In Stock
An armchair from the Bolzano collection, modern design and generous proportions combine perfectly in this deep and comfortable armchair that also has a strong and ergonomic construction.
The structure of the seat and backrest is made of aluminum (epoxy painted) in mocha color from the prestigious paint house Tiger. The legs of the cabinet are made of FSC certified teak and the rope is made of Olefin (6mm) in Sand color
Includes seat and back cushions upholstered in Sunproof Olefin fabric (specific for outdoor)
Furniture does not require assembly
Dimensions & Specifications:
Dimensions: 81 x 88 x 65.8 cm (WxDxH)
Cushion thickness: 16 cm.
Seat height from the floor (with cushion thickness included): 38 cm.
Height of the armrest from the floor: 53 cm.
Additional information
| Heigth | |
|---|---|
| Length | |
| Width | |
| Material | |
| Color | Grey |
| Seats | |
| Characteristics | |
| Collection | |
| Product space |
Mounting required (Y/N): No
General recommendations:
• Breakdowns or damage caused by:
• Accidental causes such as falls, blows, spillage of liquids, introduction of foreign bodies, as well as any other force majeure.
• Negligent, improper, or non-domestic use.
• Accelerated damage, corrosion and/or oxidation due to adverse environmental conditions
• Stains and discolorations due to non-respect of our cleaning instructions
• Damage occurred during assembly and handling without having followed the indicated assembly instructions.
Instructions for use and maintenance:
• Clean with the help of a cloth gently or use a neutral liquid soap, rinsing with plenty of water.
• Remove dust regularly with the help of a soft cloth and clear water.
• Do not use detergents or abrasive products for cleaning.
– Linseed oil treatment: Before applying a layer of linseed oil on the product in its natural state, it is advisable to leave it outside for 2 or 3 weeks, so that it takes on a homogeneous appearance and aerate it. Clean with clean water using a brush and allow to dry. Once it is well dry, it should be sanded with a sheet of sandpaper between 120 and 150 grams, carefully and loosely, following, as far as possible, the direction of the veins; this operation should never be carried out in the early hours of the day.
To maintain the color, it is advisable to repeat the process once or twice a year.
If the linseed oil has already been applied to the furniture, it is advisable to sand it every three years so that the successive coats of oil do not prevent the wood from transpiring.
Years warranty: 3 years
Manufactured according to Standard: 581-1,581-2,581-3
FSC certification (yes/no): Yes
RELATED PRODUCTS
