Imágenes del producto6 Fotos

Garden armchair / armchair in light acacia and grey rope – Baracoa

705,00 469,00

  • FSC-certified light acacia structure
  • Grey polyester rope
  • Removable and washable cushions
  • Armchair: 75x82x82

SHIPMENTS IN EARLY SEPTEMBER

Buy now and recieve it between 28/11 and 05/12

We help you to create your outdoor oasis: CONTACT US

Availability: In Stock

SKU: KMJBRCS Categories: , Tags: , ,

Garden armchair from the Baracoa collection made with a beautiful structure of light acacia wood and polyester rope in grey. The fabric of the cushions is made of polyester in light grey with a weave giving personality, the padding of the cushions is made of medium hard foam on the seat and polyester padding on the backrest.
Can be combined with the other pieces in the Baracoa collection.

Additional information

Heigth

Length

Width

Material

,

Color

Light gray

Seats

Characteristics

Collection

Product space

Height: 82cm
Width: 82cm
Depth: 75cm

Recommendations for unpacking: Do not use sharp utensils when unpacking the furniture as this may cause damage.
Mounting required (yes/no): Yes
Difficulty of assembly: Low
Assembly time: 30 minutes
Recommended persons for assembly: 2
Mounting suggestions: Prepare a clean and dry mounting area, check that none of the parts indicated in the manual are missing. We recommend wearing gloves suitable for assembly. Use only the parts and hardware supplied

General recommendations:
• Breakdowns or damage caused by:
• Accidental causes such as falls, blows, spillage of liquids, introduction of foreign bodies, as well as any other force majeure.
• Negligent, improper, or non-domestic use.
• Accelerated damage, corrosion and/or oxidation due to adverse environmental conditions
• Stains and discolorations due to non-respect of our cleaning instructions
• Damage occurred during assembly and handling without having followed the indicated assembly instructions.
Instructions for use and maintenance:
• Clean with the help of a cloth gently or use a neutral liquid soap, rinsing with plenty of water.
• Remove dust regularly with the help of a soft cloth and clear water.
• Do not use detergents or abrasive products for cleaning.
– Linseed oil treatment: Before applying a layer of linseed oil on the product in its natural state, it is advisable to leave it outside for 2 or 3 weeks, so that it takes on a homogeneous appearance and aerate it. Clean with clean water using a brush and allow to dry. Once it is well dry, it should be sanded with a sheet of sandpaper between 120 and 150 grams, carefully and loosely, following, as far as possible, the direction of the veins; this operation should never be carried out in the early hours of the day.
To maintain the color, it is advisable to repeat the process once or twice a year.
If the linseed oil has already been applied to the furniture, it is advisable to sand it every three years so that the successive coats of oil do not prevent the wood from transpiring.
Years warranty: 3 years
Manufactured according to Standard: 581-1,581-2,581-3
FSC certification (yes/no): Yes