8 FotosGarden set with wood and rope 2 armchairs and table 50cm – Lucca
1.334,00€ 1.059,00€
- Consisting of 2 armchairs, 1 table 50cm
- Wooden and beige rope structure
- Terrazzo top and raw cushions
- Armchair: 71x84x85, Table 1: 50Dx62cm
Buy now and recieve it between 27/12 and 03/01
We help you to create your outdoor oasis: CONTACT US
Availability: In Stock
Set of garden wood and rope 2 armchairs and table 50cm. The pieces of the Lucca collection are created under a structure in acacia wood, in light tones, outlined by our artisans to give it a unique design. The structure is accompanied by a beige rope braid and ecru cushions that can be removed and washed. The tables in the collection, with terrazzo tops, match perfectly with the warm tones of Lucca.
Armchair: 71x84x85, Table 1: 50Dx62cm
Additional information
| Heigth | |
|---|---|
| Length | |
| Width | |
| m2 | |
| Material | |
| Color | Beige |
| Seats | |
| Characteristics | |
| Collection | |
| Space | |
| Product space |
Assembly required (yes/no): Yes (table only)
Difficulty of assembly: Easy
Assembly time: 10 minutes
Recommended persons for assembly: 2
Mounting suggestions: Prepare a clean and dry mounting area, check that none of the parts indicated in the manual are missing. We recommend wearing gloves suitable for assembly. Use only the supplied parts and hardware.
General recommendations:
• Breakdowns or damage caused by:
• Accidental causes such as falls, blows, spillage of liquids, introduction of foreign bodies, as well as any other force majeure.
• Negligent, improper, or non-domestic use.
• Accelerated damage, corrosion and/or oxidation due to adverse environmental conditions
• Stains and discolorations due to non-respect of our cleaning instructions
• Damage occurred during assembly and handling without having followed the indicated assembly instructions.
Instructions for use and maintenance:
• Clean with the help of a cloth gently or use a neutral liquid soap, rinsing with plenty of water.
• Remove dust regularly with the help of a soft cloth and clear water.
• Do not use detergents or abrasive products for cleaning.
– Linseed oil treatment: Before applying a layer of linseed oil on the product in its natural state, it is advisable to leave it outside for 2 or 3 weeks, so that it takes on a homogeneous appearance and aerate it. Clean with clean water using a brush and allow to dry. Once it is well dry, it should be sanded with a sheet of sandpaper between 120 and 150 grams, carefully and loosely, following, as far as possible, the direction of the veins; this operation should never be carried out in the early hours of the day.
To maintain the color, it is advisable to repeat the process once or twice a year.
If the linseed oil has already been applied to the furniture, it is advisable to sand it every three years so that the successive coats of oil do not prevent the wood from transpiring.
Years warranty: 3 years
Manufactured according to Standard: 581-1,581-2,581-3
FSC certification (yes/no): Yes
RELATED PRODUCTS
