Set of outdoor furniture consisting of a low table, 2 armchairs and a two-seater sofa, made of light-colored acacia wood with black hand-braided polyester rope and anthracite-colored polyester cushions. The table top is made of wooden slats. The seat and back cushions are made of anthracite polyester with removable covers. The wood is FSC certified, thus guaranteeing the responsible management of the planet’s forest resources from an environmental, social and economic point of view.
nAll the cushions of the acacia and rope furniture set are removable and washable. You can combine it with the different elements of the Zanzibar family to complete your terrace or garden.
Height: Armchair 68.5 cm / Sofa 68.5 cm / Table 36 cm
Width: Armchair 79 cm / Sofa 79 cm / Table 65 cm
Length: Armchair 73 cm / Sofa 138 cm / Table 127.5 cm
Recommendations for unpacking: Do not use sharp utensils when unpacking the furniture as it could cause damage
Requires mounting (yes/no): Yes
Difficulty of assembly: Casualty
Assembly time: 60 minutes
Recommended people for assembly: 2
Assembly suggestions: Prepare a clean and dry mounting area, check that none of the parts indicated in the manual are missing. We recommend wearing gloves suitable for assembly. Use only the supplied parts and hardware.
General recommendations:
• Breakdowns or damage caused by:
• Accidental causes such as falls, blows, spillage of liquids, introduction of foreign bodies, as well as any other force majeure.
• Negligent, improper, or non-domestic use.
• Accelerated damage, corrosion and/or oxidation due to adverse environmental conditions
• Stains and discolorations due to non-respect of our cleaning instructions
• Damage occurred during assembly and handling without having followed the indicated assembly instructions.
Instructions for use and maintenance:
• Clean with the help of a cloth gently or use a neutral liquid soap, rinsing with plenty of water.
• Remove dust regularly with the help of a soft cloth and clear water.
• Do not use detergents or abrasive products for cleaning.
– Linseed oil treatment: Before applying a layer of linseed oil on the product in its natural state, it is advisable to leave it outside for 2 or 3 weeks, so that it takes on a homogeneous appearance and aerate it. Clean with clean water using a brush and allow to dry. Once it is well dry, it should be sanded with a sheet of sandpaper between 120 and 150 grams, carefully and loosely, following, as far as possible, the direction of the veins; this operation should never be carried out in the early hours of the day.
To maintain the color, it is advisable to repeat the process once or twice a year.
If the linseed oil has already been applied to the furniture, it is advisable to sand it every three years so that the successive coats of oil do not prevent the wood from transpiring.
Years warranty: 3 years
Manufactured according to Standard: 581-1,581-2,581-3
FSC certification (yes/no): Yes
