Beige Wood & Rope 5-Seater Garden Set – Tari
2.499,00€ 1.589,00€
- FSC-certified wooden structure
- Beige polyester rope
- Removable and washable beige cushions
- Table:120x70x38cm Sofa 193x80x82cm Armchair 70x80x82cm
SHIPMENTS IN EARLY SEPTEMBER
Buy now and recieve it between 28/11 and 05/12
We help you to create your outdoor oasis: CONTACT US
Availability: In Stock
5-seater garden set with light teak eucalyptus structure with beige polyester rope and cushions. The set consists of 2 armchairs, a 3-seater sofa, an ottoman and a coffee table. All the wood used is FSC certified sustainable. Table size: 120x70x38cm Ottoman: 60x56x43cm 3-seater sofa: 193x80x82cm Armchair: 70x80x82cm
Additional information
Heigth | |
---|---|
Length | |
Width | |
m2 | |
Material | |
Color | Beige |
Seats | |
Characteristics | |
Collection | |
Space | |
Product space |
Width: table 120cm // armchair 70cm // 3 seater sofa 193cm // otoman 60cm
Bottom: table 70cm // armchair 80cm // 3 seater sofa 80cm // otoman 56cm
Mounting required (yes/no): Yes
Difficulty of assembly: Medium
Assembly time: 70 minutes
Recommended persons for assembly: 2
Mounting suggestions: Prepare a clean and dry mounting area, check that none of the parts indicated in the manual are missing. We recommend wearing gloves suitable for assembly. Use only the supplied parts and hardware.
General recommendations:
• Breakdowns or damage caused by:
• Accidental causes such as falls, blows, spillage of liquids, introduction of foreign bodies, as well as any other force majeure.
• Negligent, improper, or non-domestic use.
• Accelerated damage, corrosion and/or oxidation due to adverse environmental conditions
• Stains and discolorations due to non-respect of our cleaning instructions
• Damage occurred during assembly and handling without having followed the indicated assembly instructions.
Instructions for use and maintenance:
• Clean with the help of a cloth gently or use a neutral liquid soap, rinsing with plenty of water.
• Remove dust regularly with the help of a soft cloth and clear water.
• Do not use detergents or abrasive products for cleaning.
– Linseed oil treatment: Before applying a layer of linseed oil on the product in its natural state, it is advisable to leave it outside for 2 or 3 weeks, so that it takes on a homogeneous appearance and aerate it. Clean with clean water using a brush and allow to dry. Once it is well dry, it should be sanded with a sheet of sandpaper between 120 and 150 grams, carefully and loosely, following, as far as possible, the direction of the veins; this operation should never be carried out in the early hours of the day.
To maintain the color, it is advisable to repeat the process once or twice a year.
If the linseed oil has already been applied to the furniture, it is advisable to sand it every three years so that the successive coats of oil do not prevent the wood from transpiring.
Years warranty: 3 years
Manufactured according to Standard: 581-1,581-2,581-3
FSC certification (yes/no): Yes