Imágenes del producto3 Fotos

Low garden table square wood 87.5×87.5 – Icaria

347,00 275,00

  • Square coffee table
  • FSC acacia wood structure
  • Wide slats of 17cm
  • Measurements: 87.5×87.5x25cm

Buy now and recieve it between 28/11 and 05/12

We help you to create your outdoor oasis: CONTACT US

Availability: In Stock

SKU: KMJ50148 Categories: , Tags: ,

Square wooden garden low table. The pieces in the Icaria collection are created under a structure of turned acacia wood and without edges they are wide and thick slats. The structure is wrapped in a beige rope braided by our artisans. The cushions are beige and are removable and washable.
Measurements: 87.5×87.5x25cm

Additional information

Heigth

Length

Width

Material

Shape

Collection

High: Table: 25cm
Wide: Table: 87.5cm
Bottom: Table: 87.5cm
Recommendations for unpacking: Do not use sharp utensils when unpacking the furniture as this may cause damage.
Mounting required (yes/no): Yes
Difficulty of assembly: Easy
Assembly Time: 5
Recommended persons for assembly: 2
Mounting suggestions: Prepare a clean and dry mounting area, check that none of the parts indicated in the manual are missing. We recommend wearing gloves suitable for assembly. Use only the supplied parts and hardware.

General recommendations:
• Breakdowns or damage caused by:
• Accidental causes such as falls, blows, spillage of liquids, introduction of foreign bodies, as well as any other force majeure.
• Negligent, improper, or non-domestic use.
• Accelerated damage, corrosion and/or oxidation due to adverse environmental conditions
• Stains and discolorations due to non-respect of our cleaning instructions
• Damage occurred during assembly and handling without having followed the indicated assembly instructions.
Instructions for use and maintenance:
• Clean with the help of a cloth gently or use a neutral liquid soap, rinsing with plenty of water.
• Remove dust regularly with the help of a soft cloth and clear water.
• Do not use detergents or abrasive products for cleaning.
– Linseed oil treatment: Before applying a layer of linseed oil on the product in its natural state, it is advisable to leave it outside for 2 or 3 weeks, so that it takes on a homogeneous appearance and aerate it. Clean with clean water using a brush and allow to dry. Once it is well dry, it should be sanded with a sheet of sandpaper between 120 and 150 grams, carefully and loosely, following, as far as possible, the direction of the veins; this operation should never be carried out in the early hours of the day.
To maintain the color, it is advisable to repeat the process once or twice a year.
If the linseed oil has already been applied to the furniture, it is advisable to sand it every three years so that the successive coats of oil do not prevent the wood from transpiring.
Years warranty: 3 years
Manufactured according to Standard: 581-1,581-2,581-3
FSC certification (yes/no): Yes