Garden set oval table 220×115 and 8 chairs rope beige – Riviera
2.742,00€ 2.109,00€
- Oval garden table made of light acacia wood
- 8 garden chairs with acacia arms and rope with beige cushions
- FSC certified wood
- You can combine it with the different elements of the Riviera family.
Buy now and recieve it between 19/03 and 26/03
We help you to create your outdoor oasis: CONTACT US
Availability: In Stock

Set formed by an oval dining table 220x115cm of acacia wood light finish and 8 Riviera garden chairs that is made with a light color acacia wood structure, hand-braided polyester rope and beige cushions. The seat and backrest cushions are made of beige polyester imitating linen. The wood is FSC certified, guaranteeing good forest, economic and social management of resources.
Width: Chair 59 cm / Table 115 cm
Depth: Chair 59 cm / Table 220 cm
Seat depth without cushion: 11cm
Seat depth with cushion: 36cm
Seat height: 51cm
Mounting required (yes/no): Yes
Difficulty of assembly: Low
Assembly time: 120 minutes
Recommended persons for assembly: 2
Mounting suggestions: Prepare a clean and dry mounting area, check that none of the parts indicated in the manual are missing. We recommend wearing gloves suitable for assembly. Use only the parts and hardware supplied.
General recommendations:
• Breakdowns or damage caused by:
• Accidental causes such as falls, blows, spillage of liquids, introduction of foreign bodies, as well as any other force majeure.
• Negligent, improper, or non-domestic use.
• Accelerated damage, corrosion and/or oxidation due to adverse environmental conditions
• Stains and discolorations due to non-respect of our cleaning instructions
• Damage occurred during assembly and handling without having followed the indicated assembly instructions.
Instructions for use and maintenance:
• Clean with the help of a cloth gently or use a neutral liquid soap, rinsing with plenty of water.
• Remove dust regularly with the help of a soft cloth and clear water.
• Product color may vary depending on lighting and environmental conditions. Variation of veins and/or tonality.
• Do not use detergents or abrasive products for cleaning.
– Linseed oil treatment: Before applying a layer of linseed oil on the product in its natural state, it is advisable to leave it outside for 2 or 3 weeks, so that it takes on a homogeneous appearance and aerate it. Clean with clean water using a brush and allow to dry. Once it is well dry, it should be sanded with a sheet of sandpaper between 120 and 150 grams, carefully and loosely, following, as far as possible, the direction of the veins; this operation should never be carried out in the early hours of the day.
To maintain the color, it is advisable to repeat the process once or twice a year.
If the linseed oil has already been applied to the furniture, it is advisable to sand it every three years so that the successive coats of oil do not prevent the wood from transpiring.
Years warranty: 3 years
Manufactured according to Standard: 581-1,581-2,581-3
FSC certification (yes/no): Yes