6 FotosBalcony set 2 beige rope chairs and side table – Riviera
553,00€ 425,00€
- Set of 2 garden chairs and acacia/li coffee table>
- Made with wooden structure with FSC certificate of light color acacia
- Hand-braided polyester rope and beige cushions
- You can combine them with the other elements of the Riviera product family
We help you to create your outdoor oasis: CONTACT US
Sin Stock
AvÃsame cuando haya stock
Set consisting of 2 garden chairs Riviera ( Height 75 x Length 58 × Depth 66 ) is made of a light colored acacia wood structure, hand-braided polyester rope and beige cushions. The seat and backrest cushions are made of beige polyester imitating linen.
And a round support side table 40cm diameter and 53cm high, made of acacia wood with a clear finish. The wood is FSC certified, guaranteeing good forest, economic and social management of resources.
Additional information
| Material |
|---|
Width: Chair 58 cm / Table 40 cm
Depth: Chair 66 cm / Table 40 cm
Seat depth without cushion: 71cm
Seat depth with cushion: 51cm
Seat height: 45cm
Mounting required (yes/no): Yes
Difficulty of assembly: Low
Assembly time: 30 minutes
Recommended persons for assembly: 2
Mounting suggestions: Prepare a clean and dry mounting area, check that none of the parts indicated in the manual are missing. We recommend wearing gloves suitable for assembly. Use only the supplied parts and hardware.
General recommendations:
• Breakdowns or damage caused by:
• Accidental causes such as falls, blows, spillage of liquids, introduction of foreign bodies, as well as any other force majeure.
• Negligent, improper, or non-domestic use.
• Accelerated damage, corrosion and/or oxidation due to adverse environmental conditions
• Stains and discolorations due to non-respect of our cleaning instructions
• Damage occurred during assembly and handling without having followed the indicated assembly instructions.
Instructions for use and maintenance:
• Clean with the help of a cloth gently or use a neutral liquid soap, rinsing with plenty of water.
• Remove dust regularly with the help of a soft cloth and clear water.
• Product color may vary depending on lighting and environmental conditions. Variation of veins and/or tonality.
• Do not use detergents or abrasive products for cleaning.
– Linseed oil treatment: Before applying a layer of linseed oil on the product in its natural state, it is advisable to leave it outside for 2 or 3 weeks, so that it takes on a homogeneous appearance and aerate it. Clean with clean water using a brush and allow to dry. Once it is well dry, it should be sanded with a sheet of sandpaper between 120 and 150 grams, carefully and loosely, following, as far as possible, the direction of the veins; this operation should never be carried out in the early hours of the day.
To maintain the color, it is advisable to repeat the process once or twice a year.
If the linseed oil has already been applied to the furniture, it is advisable to sand it every three years so that the successive coats of oil do not prevent the wood from transpiring.
Years warranty: 3 years
Manufactured according to Standard: 581-1,581-2,581-3
FSC certification (yes/no): Yes
RELATED PRODUCTS
